User's Manual

28
Fixed focus
To focus on the subject positioned outside of the center, use the focus lock function.
Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. The camera status lamp (green) will light up, indicating
that the camera is in focus. Be careful not to press the SHUTTER button all the way down to
avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera to recompose your
picture as desired, and then press the SHUTTER button completely to take the picture. If you
release your finger from the SHUTTER button, the focus lock function will be canceled.
[ The image to be captured ] [ Press the SHUTTER button
halfway and focus on the subject ]
[ Recompose the picture and fully
depress the SHUTTER button ]
FLASH( ) / LEFT button
AUTO
FOCUS
MACRO
AUTO 100 200 400
WIDE 0.8~3 0.8~2.6 1~3.7 1~5.2
TELE 0.8~2 0.8~1.5 1~2.1 1~2.9
WIDE 0.2~0.8 0.2~0.8 0.2~0.8 0.2~0.8
TELE 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8
(Unit : m)
[ Selecting the Auto flash ]
Flash range
When the menu is displayed on the LCD monitor, pressing
the LEFT( ) button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT( ) button operates as the FLASH ( ) button.
Selecting the flash mode
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the Flash( ) button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
ISO