User's Manual

《42》

SF button

■ Pressing the SF button selects the SF(Safety Flash) mode

In poor indoor light conditions, Safety Flash will help you get a good image without the use of

a flash.

● Things to watch out for using the SF mode

1. If you select the SF in the 2048 or above image size, the captured image size is changed

to 1600.

2. The SF range is 2m(WIDE) and 1.5m(TELE).

3. The digital zoom will not operate in the SF mode.

4. If the lighting conditions are brighter than fluorescent lighting condition, the SF doesn’t

activate.

5. If the lighting condition is darker than in fluorescent

lighting condition,[SF OFF] message and camera shake

warning indicator ( ) will display.

If you press the shutter button in this condition, the SF

will not activate.

6. If the subject is moving the final image captured may be

blurred.

7. As the SF uses the camera’s digital processor, images

taken using the SF may take a little longer for the camera to process.

SF OFF