User's Manual

SETTING UP USB DRIVER FOR WINDOWS
How to set up the software for Windows
91
SOFTWARE
4
After restarting computer, connect the PC to the camera with the USB cable.
5
Turn the camera power on with the mode dial set on PC. [Found New Hardware Wizard]
will appear and the computer will recognize the camera. If the PC OS is Windows
98/98SE, [ Found New Hardware Wizard ] will start twice. Don’t close the [Found New
Hardware Wizard] whilst it is being processed.
6
USB Driver installation is complete. After
installation, [Removable Disk] will be displayed
under [My computer] as shown alongside.
Note
Before connecting the camera to the PC, you must install the camera driver.
After driver installation, you have to restart the computer.
Should the computer not find the Camera Driver after installation, please try one or more of
the following measures.
1. Delete the camera driver, and re-install the driver.
2. Refer to FAQ to check for a possible solution to the problem.
If your PC’s central processing unit is VIA Chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera webpage.
http://www.samsungcamera.com