User's Manual

70
SETTING UP CAMERA SYSTEM
IMPRINT
There is an option to include DATE/TIME on still pictures.
There are 3 types of IMPRINT.
- OFF: IMPRINT function is cancelled.
- DATE: The date is included in the still picture.
- DATE & TIME: The date and time is included in the still picture.
This function is not available in continuous shot and movie clip.
1.Turn the camera on.
2.Rotate the mode dial to SET UP mode( ).
3.[SETUP 1/3] menu will display on the LCD monitor.
4.Select [SETUP 2/3] menu by pressing the LEFT (
) /
RIGHT ( ) buttons.
5.Press the DOWN button ( ) and select [IMPRINT].
6.Shift the cursor to the [IMPRINT] sub menu by pressing
the RIGHT button ( )
7.Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is OFF.
8.After selecting the desired sub menu, press the OK button to confirm the setting. After
confirming the setting, the cursor will move to the [SETUP 2/3] menu automatically.
SETUP 2/3
BACK : SET : OK
OFF
DATE
DATE &TIME
DATE SETUP
IMPRINT
DATE TYPE
USER SET