User's Manual

SETTING UP PLAY BACK FUNCTIONS

6.Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons.

- ONE PICTURE : This protects a single picture.

- ALL PICTURES : This protects all the pictures on the CF CARD.

7.Press the OK button and the PROTECT setting display will show on the LCD monitor.

Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons and press OK

button.

- LOCK : Sets up the PROTECT function.

- UNLOCK : Discards the protect function

8.If you select [ONE PICTURE] in step 6, the other picture can be protected by pressing the

LEFT( ) / RIGHT( ) button. the process of setting up is same as step 7.

9.Pressing the MENU button clears the menu display and the LOCK indicator will show on the

LCD monitor as shown below.

PROTECT

EXIT : MENU SET : OK

UNLOCK

LOCK indicator

There is no indicator when the UNLOCK

function has been selected.

Reference

A picture in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but will

NOT be protected from the [FORMAT] function.