User's Manual

56
SETTING UP PLAY BACK FUNCTIONS
MIC / UP button
When the LCD monitor is turned on, pressing the button will either cause the cursor to
move up or change a selected sub menu.
When the LCD monitor is not turned on, pressing the button will allow a sound recording
to be added to a stored still picture.
1. Turn the camera on.
2. Rotate the mode dial to PLAY mode.
3. Press the LEFT (
) / RIGHT ( ) buttons to select
picture that you wish to add sound to.
4. Press MIC button ( ) and the sound recording
indicator will display. The camera is now ready to record
sound.
5. Press the shutter button to start recording. The
[RECORDING..] message will be displayed on the LCD
monitor (as shown) and sound is recorded to the still
picture.
6. The sound will record for ten seconds. Recording can be
stopped by pressing the shutter button again.
[ Pressing MIC button ]
[ Being recorded ]
PLAY & PAUSE / DOWN button
When the LCD monitor is turned on, pressing the button will move the cursor down or
change the sub menu.
When the LCD monitor is not turned on, the button is used as the PLAY & PAUSE
button.
The PLAY & PAUSE button is used for playing and pausing a sound recorded still picture,
movie clip or slide show.
The PLAY & PAUSE button will only operate in single display mode.