User's Manual

SETTING UP THE SHOOTING FUNCTION

SHARPNESS

In the STILL PICTURE mode, you can select picture sharpness.

Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject matter.

1.Turn the camera power on.

2.Rotate the mode dial to STILL PICTURE mode.

3.Do not turn the LCD monitor off.

4.Press the MENU button to display the menu on the LCD

monitor.

5.Press the DOWN button( ) and select [SHARPNESS].

6.Shift the cursor by pressing the RIGHT button ( ) to the

[SHARPNESS] sub menu.

7.Select the desired sub menu by pressing the UP ( ) /

DOWN ( ) buttons. The default is NORMAL.

8.After selecting the desired sub menu, press OK button to

confirm the setting.

9.Press the MENU button to cancel the menu display.

< STILL PICTURE mode >

STILL PICTURE 1/2

BACK : SET : OK

SOFT

NORMAL

HARD

SIZE

QUALITY

SHARPNESS

EFFECT

Reference

Explanation of SHARPNESS sub menu

SOFT : This gives smooth edges and the final picture will have a soft appearance.

NORMAL : This setting will give a standard finish to the final picture.

HARD : This will give the picture a crisp and clear appearance.