User's Manual

SETTING UP THE SHOOTING FUNCTION

SELF-TIMER / RIGHT button

When the menu is displayed on the LCD monitor, pressing the button makes the cursor

shift to the sub menu.

When the menu is not displayed on the LCD monitor, the button operates as the SELF

TIMER button.

This function is used when the photographer would also like to be in the picture.

1. Turn the camera power on.

2. Rotate the mode dial to the shot mode (Still picture,

Night picture, Movie clip).

3. Do not turn the LCD monitor off.

4. If the self-timer indicator is displayed on the LCD monitor

by pressing the SELF TIMER button, the setting is

completed.

5. Pressing the shutter button will allow an interval of ten

seconds before the picture is taken. After that, the self-

timer is canceled.

< Selecting Self Timer >

Reference

The default is OFF

The self-timer LED indicator (red) will blink for 10 seconds after the SELF-TIMER button has

been pressed.

- For the first seven seconds, the LED blinks at one second intervals

- For the final three seconds, the LED blinks quickly at 0.5-second intervals.

If you operate the Power button, Mode dial, Self-timer button or open the Card door during

the self-timer operation, the self-timer function is cancelled.