User's Manual

24
PREPARATION
Selecting the date and time
You can record the date and time with the picture data in the CF CARD when you take a picture.
You will need to check and select the correct Date / Time when :
The camera is used for the first time.
The batteries have been removed for a period longer than 1 hour.
1
Turn on the power by pressing the Power button.
2
Set the mode dial to the SETUP mode ( SET ).
3
The setup menu will show on the LCD monitor.
4
Move to the SET 2/3 menu by using the RIGHT
button( ) on the 5-function button.
5
Move to the DATE SETUP by using the DOWN button( ) on
the 5-function button and press the RIGHT button( ).
A menu will then be displayed on the LCD monitor, as shown
alongside.
6
Select correct Date / Time by using the 5 -function button and press the OK button to update Date /
Time. SET 2/3 menu will be displayed on the LCD monitor.
7
The setting is completed. The camera can now be used with the selected camera mode.
5-function button
SETUP 2/3
BACK : SET : OK
2001/01/01
12 : 00
DATE SETUP
IMPRINT
DATE TYPE
USER SET
Reference
The selection range for date/time setup covers from 2001~2050.(It is automatically programmed to allow for a leap year/ month)
It is originally set as [2001/01/01 12:00]