Operation Manual

that indicated as coin tray is full.
：Automatically check each module if it’s
working normally.
：To swipe magnetic card to check if it works normally.
Click it, there’s a message: please swing magnetic card. Swipe card, then
the machine will identify the card information indicating it’s under
normal condition, otherwise, it’s faulty. Please note: there’s another
pop-up message after 15s without any operation: Magnetic device may
be fault.
：To cast one coin to check if coin accepter works.
：To complete one test to check if sensor works.
：The number in top right indicates the past times of
blowing.When it reaches 2000, the icon turns red reminding
it’s time to replace a new sensor or do recalibration.