User's Manual

SUN TELECOM INTL. PROPRIETARY

bottom of unit body.

4. Server Unit

1) Install Server Unit batteries located on the back side of the unit. The Server Unit can be worn

in the server band or can be worn in a holster. The server band is an elastic wrist watch type

band that allows the server easy access to the Server Unit especially when the servers hands

are full. The holster allows the Server Unit to be clipped to a piece of clothing.

4.4.Specifications

1. Main Unit

1) The Main Unit controls the flow of messaging traffic within the establishment. The Main

Unit receives requests from the Chef/Management Unit and the Table Unit and transmits them

to the appropriate Server Unit.

3. Table Unit

1) The Table Unit has menu options labeled 1-6. When one of these options are selected, the

request is sent to the Main Unit along with the Table Unit address. The Main Unit will send

the request to the appropriate Server Unit.

4. Chef/Management Unit

1) The Chef/Management sends a request to the Main Unit. The Main Unit sends the request

along to the appropriate Server Unit. This will notify the Server that their food is ready for

pick up.

5. Server Unit

1) The Server Unit receives requests sent to it by the Main Unit. The Main Unit transfers requests

from both the Table Unit and the Chef/Management units.

5. Specification ss

EXPEDITOR Units

Specifications MAIN CHEF TABLE SERVER  

Frequency 450 ~ 470 MHz

Freq. Stability 5 ppm

Data Rate 1200 bps

Output Power 100 mW 10 mW 5 mW Max.

Trans. Protocol FSK 2 Level POCSAG

PLL Frequency PLL Synthesizer

Batt. AAA 3 AAA 1

Ext. Power 9V/1.5A SMPS 9V 1.5A

Dimension 236*200*200 174*260*50 95*133*43 Mm

Transmit/Receive Transmit/Receive Transmit/Receive Transmit/Receive Receive only