User's Manual

SETTING THE ALARM
13. SETTING THE ALARM
The pager has a daily alarm for you to set at a
specific time to alert you to any important task.
Within the standby screen, press the FUNCTION
button and hold for at least 2 seconds to enter the
function menu mode.
Press the FUNCTION button to scroll through the
menu prompt until the "SET ALARM?"prompt is
displayed(Fig.13a).
Press the READ button to access the alarm setting
mode.
The pager will display the "ALARM ON"prompt
(Fig.13b).
Press the FUNCTION button to set the alarm.
This will cause the hour field to blink.
Press the READ button to add the hour.
Press the FUNCTION button to move to the minute
field and set the minute by pressing the READ
button(Fig.13d).
< Fig.13a >
< Fig.13b >
< Fig.13c >
< Fig.13d >