User's Manual

DELETING MESSAGES
Clear All
The pager will allow the"CLEAR ALL" function only if it
has received more than one message. In the standby
screen, press the FUNCTION button and hold for at
least 2 seconds to enter into the function menu mode.
Press the FUNCTION button to scroll through
the menu prompt until the "CLEAR ALL? "prompt is
displayed(Fig.12c).
Press the READ button to delete all read and
unlock messages. The pager will display "ALL
CLEARED" to indicate that all messages have been
deleted(Fig.12d).
< Fig.12c >
< Fig.12d >