User's Manual

5.3.1 Storing Phone Numbers
1. Pick up the telephone handset and Press "36*#51"
2. Press the 2 digit address you would like to store the phone number.
Suppose the address is <4>, press [04].
3. Press the phone numbers to be saved digit by digit .
4. When you press button (saving), you will hear a <confirmation beep>
indicating the number has been successfully stored.
5.3.2 Deleting Phone Numbers
1) Deleting a Number
1. Pick up the telephone handset and Press "36*#52"
2. Press the 2 digit address to be deleted.
3. When you press button (saving), you will hear a <confirmation beep>
indicating the number has been successfully deleted.
2) Deleting All Numbers
1. Pick up the telephone handset and Press "36*#53"
2. When you press button (saving), you will hear a <confirmation sound>
indicating all stored numbers have been successfully deleted.
This terminal is equipped with voice privacy function to prevent illegal tapping.
There are two detailed settings available, <Standard> for regular level voice privacy
mode and <Enhanced> for reinforced voice privacy mode.
<*( )>
<*( )>
<*( )>
<*( )>
1. Press "36*#6".
2. Press <1> button for < Enhanced Voice Privacy > mode or <2> button for
< Standard Voice Privacy > mode.
3. Press button to save the setting .
5.3 Phone Book
5.4 Voice Privacy
This function is used to control the ringer frequency and cadence. Select the frequency
first and then select the cadence. Default setting is 20Hz, 1 sec On 2sec Off.
5.5.1 Ringer Frequency Setting
5.5 Ringer Frequency & Cadence Control
1. Press "36*#7".
2. Select a desired number from 1(16Hz) , 2(20Hz), 3(25Hz).
3. Press button to save the setting .
[Example] If you want to 16Hz, Press 36*#71*
<*( )>