User Manual

DSO-5200
USB Manual
17
Probe Calibration
DSO-5200 USB Calibration
1. When manufactured, DSO-5200 USB is calibrated manually to obtain
maximum performance.
2. You may calibrate DSO-5200 USB 5 or 6 months after purchase.
Probe Compensation
1. You must use a probe with more than 200MHz bandwidth to get undistorted
signal.
2. Probe should be compensated whenever it is connected for the first time.
3. Connect calibration signal to channel 1 and push AUTOSET.
4. Check the shape of the displayed waveform.
5. Adjust the probe until the displayed waveform is compensated.