User’s Guide DSO-5200 USB PC Based Digital Oscilloscope Operation Manual
DSO-5200 USB Manual Certificate of Product Warranty This product’s warranty, provided by our company, covers a period of 1 year form the date of purchase. All faulty parts and/or functions, resulting despite user’s normal use, will be repaired and/or replaced at no charge during the warranty period. However, if any of the malfunctions are caused by user carelessness, inadequate maintenance, or natural disaster, we will the provide repair and/or replacement services for a fee regardless of warranty period.
DSO-5200 USB Manual environments. It is essential that you, the users, should verify that the software and product are functioning to your requirements before relying caused on them or the data that they generate. We do not accept responsibility for any loss or injury caused by the use of the product or software. It is the user’s responsibility to ensure that the product is suitable for the user’s application.
DSO-5200 USB Manual Precautions for Safety The following instructions are provided for safe and correct use of the product and to prevent a potentially dangerous situation or damage in advance. Be sure to read through them before you use the product. Recommended Usage Environment l The ambient temperature and relative humidity should be 0-40℃ and 10-80% respective for the normal operation of the product.
DSO-5200 USB Manual Handing Precautions l The probe ground lead is at ground potential. Do not connect the ground lead to an elevated voltage. Connect the ground lead of the probe to earth ground only. If measuring the floating potential, we will recommend the measurement by the differential motion method using CH1 and CH2. l Do not connect or disconnect the product with the probe or test lead which is connected to a voltage source.
DSO-5200 USB Manual Maintenance and Storage l If not using it for a long term, remove the USB cable from the product. l The recommended temperature and humidity for equipment storage is 25℃ at 50% humidity. After Service l There are no parts that you can replace inside the product. Do not attempt replacing a part yourself. It can give you an electric shock. l Do not attempt to open the case or repair yourself. It can cause an electric shock or other safety accidents.
DSO-5200 USB Manual Hardware Specification Input Max.
DSO-5200 USB Manual 10s,20s,40s,10m,20m,40m,1h /div 1-2-4 sequence) Acquisition mode Equivalent sampling:2ns/div ~ 4us/div Real-time sampling: 10us /div ~ 400ms/div Roll mode: 1s/div ~ 1h/div Range 10 divisions Buffer size 10K ~28K samples Trigger Mode Auto, Normal and Single Type Edge trigger: Rising edge, falling edge. Autoset Yes Range 10 divisions Trigger level +/-4 divisions Settabillity 0.
DSO-5200 USB Manual Introduction DSO-5200 USB developed by our company. is a portable PC-based Digital Oscilloscope. High performance DSO-5200 USB has the following features: 200MHz analog bandwidth, 200MHz real-time sampling. USB connected DSO-5200 USB uses USB that supports plug and play, with 12Mbp communication speed. Best performance for your dollar DSO-5200 USB has many features that are comparable to the high speed stand-alone DSOs. But it costs a fraction of the price.
DSO-5200 USB Manual Various data format processing DSO-5200 USB can save waveform in the following formats: text file, jpg/bmp graphic file, MS excel/word file. Software Installation 1. While in Windows, insert the installation CD into the CD-ROM drive. 2. The installation should start up automatically. Otherwise in Windows Explorer, switch to the CD-ROM drive and run ‘Setup.exe’. 3. The DSO-5200 USB Installation is started. Click 'Next' to continue. 4. Choose a destination directory.
DSO-5200 USB Manual 5. Check the setup information. Click Next to start copying of files. 6. This Status dialog is displayed during copying of files.
DSO-5200 USB Manual 7. Updating Your System Configuration. 8. The installation is complete.
DSO-5200 USB Manual Hardware Setup 1. Connect the A-Type Plug of USB cable to your PC’S USB port. 2. Connect the B-Type Plug of USB cable to DSO-5200 USB’S port. 3. New hardware is found. 4. New hardware search wizard starts.
DSO-5200 USB Manual 5. New hardware search wizard starts to search 6.
DSO-5200 USB Manual 7. Finish new hardware search wizard. 8. New hardware is found.
DSO-5200 USB Manual 9. New hardware search wizard starts to search 10. New hardware search wizard starts to copy files.
DSO-5200 USB Manual 11. New hardware wizard installs software and finish new hardware search wizard. Setup DSO-5200 USB.inf under windows 2000 When ‘DSO-5200USB.inf’ file is not detected automatically, you see the following dialog box. In this case you must install ‘DSO-5200 USB.inf’ file manually. 1. Choose 'Search for a suitable driver for my device' button. Click ‘Next’ to continue. 2. Specify a location. Click ‘Next’ to continue. 3. The ‘DSO-5200 USB.
DSO-5200 USB Manual Probe Calibration DSO-5200 USB Calibration 1. When manufactured, DSO-5200 USB is calibrated manually to obtain maximum performance. 2. You may calibrate DSO-5200 USB 5 or 6 months after purchase. Probe Compensation 1. You must use a probe with more than 200MHz bandwidth to get undistorted signal. 2. Probe should be compensated whenever it is connected for the first time. 3. Connect calibration signal to channel 1 and push AUTOSET. 4. Check the shape of the displayed waveform. 5.
