User's Manual

System Requirements:
The followings are required for properly using this product or installing the software coming with it:
• Computer: IBM PC/AT or compatible, Power Macintosh, PowerBook, iMAC or iBook
• Operation System: Windows 98, Windows ME, Windows 2000, Windows XP, Linux 2.4 and up,
MAC OS 9.0 or up.
• Connection port: USB
• Minimum Hard Disk Drive space: 3 MB
Important Notice:
• Since there is no built-in Mass Storage Driver coming with Windows 98, you must install the
driver which comes with this product in order to properly use the product under Windows 98.
• You can directly use this product on most of the platforms currently available. But, to properly use
the application tools coming together with the product, you have to run the setup program which
comes with this product. The setup program will automatically install the drivers required by the
applications.
• All software programs coming together with this product can be run under Microsoft Windows OS,
MAC OS, and Linux OS.
• The basic functions of the USB drive can be used under Microsoft Windows OS.
Descriptions of the Parts of the USB Drive:
• USB Interface: This is the connector to be plugged into the computer
• Write Protection Switch: If put at the “ON” position, you are only able to read the drive and not
able to write the drive. To write data or file into the drive, set it at the “OFF” position.
• LED: When the drive is under use, the LED will flash to indicate the operation status.
USB Interface
Write Protection Switch
LED