STOCKHOLM owner’s manual
You’ve chosen well The Vifa Stockholm . A speaker that looks as good as it sounds. That you can bring almost everywhere. That will help you celebrate life. It’s designed to be intuitive for you to use. This manual just spells out the details - for instance, how to connect wirelessly in a flash.
IMPORTANT SAFETY INSTRUCTIONS Regulatory Safety Information 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Buttons and indicators on Stockholm ..................................6 Status indicator.....................................................................7 Input options.........................................................................8 Connecting priority...............................................................9 Connecting to Stockholm Bluetooth .............................................................................10 Wi-Fi DIRECT.......................................................
BUTTONS AND INDICATORS ON STOCKHOLM You can change the light intensity of the status indicator using the Vifa app.
STATUS INDICATOR No light – Stockholm is in standby mode Breathing – Stockholm is hibernating (Stockholm will automatically go to hibernation after 5 min. without signal) To wake up Stockholm press the POWER button. • From standby: press until the status indicator flashes WHITE. • From hibernation: play music on one of the inputs, or press the power or one of the vol. buttons shortly.
INPUT OPTIONS 8 • Bluetooth Fast and easy and works for virtually every phone, tablet or MAC/PC - supports aptX for Hi-Fi sound. • Wi-Fi Works for phones, tablets, MAC/PC Wi-Fi and networked dlna enabled devices - supports Wi-Fi DIRECT. • Wired optical or analog For music players,media players or TV without wireless connection. • Wired USB Works for iOS device at present – will charge your iOS device while playing music from it.
CONNECTING PRIORITY Stockholm makes automatic selection of input for you based on the following rules. 1. 1st priority is Wi-Fi and USB If Wi-Fi or USB is connected and playing music, other connections are disconnected. 2. 2nd priority is Bluetooth If Bluetooth is connected and playing music, a wired analog or optical connection will be disconnected. 3. 3th priority is wired When no Bluetooth, USB or Wi-Fi is used, you can use the wired input.
CONNECTING WITH BLUETOOTH Fast and easy wireless connection for virtually every phone 1. Enable Bluetooth paring on your device and select Vifa BTxxxxxx. as your Bluetooth device. 2. Let the music play, the status indicator turns BLUE when Stockholm receives the music. 3. Adjust the volume on Stockholm and your device.
CONNECTING DIRECT WITH Wi-Fi For AirPlay and dlna direct playback 1. Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2. Find Wi-Fi network settings on your device. 3. Select the network called VIFA_....... (No password required) 4. Play music on your device - the status indicator turns solid WHITE when Stockholm receives the music.
CONNECTING TO YOUR Wi-Fi NETWORK Manual Setup VIFA_AIRPLAY 1. Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2. Find Wi-Fi network settings on your device. 3. Select the network called VIFA_....... (No password required) 4. On your device open the browser (e.g. Safari or Internet Explorer) and enter 192.168.1.1 in the address line, and press enter.
http://192.168.1.1 VIFA AIRPLAY SETUP 5. Now the Stockholm setup page open up. 6. Choose your network and enter the password if needed. Then type in the name you want displayed for Stockholm on the network ex. “Stockholm Living room”. 7. Then press “Apply”. 8. On your device, remember to change network back to your network. 9. Play music on your device - when the status indicator turns solid WHITE the connection is established.
CONNECTING TO YOUR Wi-Fi NETWORK Using iOS device 1. Make sure your iOS device is connected to your network. 2. Connect your iOS device to Stockholm using a USB cable. 3. Press and hold the CONNECT button on Stockholm until the status indicator flashes YELLOW rapidly and then release the CONNECT button.
4. The iOS device will ask you if it may transfer network settings to the speaker. Press Allow on the iOS device. 5. When the status indicator on Stockholm turns solid WHITE, the connection is established.
CONNECTING TO YOUR Wi-Fi NETWORK Using WPS WPS 1. Press WPS button on your router. 2. Press and hold the CONNECT button until the status indicator flashes YELLOW rapidly and then release the CONNECT button. 3. When the status indicator on Stockholm turns solid WHITE, the connection is established.
PLAYBACK THROUGH Wi-Fi Connect your playback device and Stockholm to the same Wi-Fi network - and playback is simple, choose Stockholm as sound device or renderer on your playback device. For iOS device just press the AirPlay logo and choose Stockholm . Using iTunes on a MAC/PC, you can stream music through your network to multiple Vifa Stockholm simultaneously. You can even remote control iTunes with a free Apple remote app.
WIRED CONNECTION Connect Aux optical and analog input; MP3 players, media streamer or TV USB / iOS device 18 • On the rear side of Stockholm the 3,5 mm mini-jack auxiliary input, will support 2 channel analog signal or optical input with a digital data stream up to 24bit/192kHz. • To lock on to wired input, press and hold the CONNECT button, until the status indicator flashes rapidly GREEN and then release.
RESET AND SET TO FACTORY DEFAULT Connect Reset Power RESET - USED IF STOCKHOLM LOCKS UP To reset Stockholm press the reset button shortly - no user settings will be lost. FACTORY DEFAULT - SET’S STOCKHOLM ’S SOFTWARE BACK TO FACTORY SETTINGS To factory default Stockholm – press and hold the POWER and the CONNECT button simultaneously until the status indicator starts triple flashing. Release the buttons and Stockholm will go to factory default – after factory default ALL USER SETTINGS WILL BE LOST.
THE VIFA APP To get the most of your Vifa Stockholm download the free Vifa app. You can find links to the app. under “support” on the Vifa website. The Vifa app. allows you to: • Adjust the sound to your preferred taste or surroundings • Change the name that Stockholm will show on the Wi-Fi network. • Change the network settings on Stockholm • Manage your inputs on Stockholm • Adjust the light intensity of the ”status indicator” www.vifa.
PRODUCT CARE This product is designed to premium music performance in normal living space. Exposure to rain, moisture, high humidity or sources of heat may damage the product. The intended use is within a temperature range of 5 - 40°C (40 - 105°F). CLEANING Your Vifa product is covered by beautiful highly durable textile from Kvadrat. Remove non-greasy stains by carefully dabbing with a lint-free cloth or use a lint roller to remove lint from the textile.
TROUBLESHOOTING In the extreme case that Stockholm is pushed to overheating, the status indicator lights RED constantly – please set Stockholm to standby mode by pressing the POWER button until the status indicator flashes WHITE twice. After this, please unplug the power cord and wait for approximately 5 min. before plugging in Stockholm to the power again. Here you can find further support on our Vifa products: www.vifa.
SPECIFICATIONS Description Wireless loudspeaker Technical features Bluetooth aptX. Wi-Fi DIRECT Apple AirPlay Works with dlna DSP signal processing Lithium Ion battery Force Balanced Woofers Digital pure path amplifiers Driver units Tweeter 2 X 28 mm Vifa driver unit with soft dome and neodymium magnet. Midrange 2 X 80 mm Vifa driver unit with aluminium cone and neodymium magnet . Woofer 4 X 100 mm Vifa driver unit with flat sandwich cone and neodymium magnet.
REGISTER AND TRADEMARKS We encourage you to register your product at: www.vifa.dk/register A Vifa product is in compliance with directives of relevance, including RoHS directive – see product label for more regional regulatory approvals. Vifa Stockholm AirPlay works with iPod touch (4th, 3rd and 5th generation), iPhone (5S, 5C, 5, 4S, 4, 3GS), iPad (4th, 3rd, 2nd and 1st generation), iPad mini, with IOS 4.3.3 and iTunes 10.2.2 (Mac or PC) or later.
IMPORTANT STATEMENTS: This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la section 15 des réglementations de la FCC. Le fonctionnement de l’appareil est sujetaux deux conditions suivantes : 1.
User manuals for licence-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
2013 12 REV.1 For more information please visit our website at www.vifa.
