COPENHAGEN owner’s manual
You’ve chosen well The Vifa Copenhagen. A speaker that looks as good as it sounds. That you can bring almost everywhere. That will help you celebrate life. It’s designed to be intuitive for you to use. This manual just spells out the details - for instance, how to connect wirelessly in a flash.
Introduction..........................................................................3 Buttons and indicators on Copenhagen................................6 Status indicator.....................................................................7 Input options.........................................................................8 Connecting priority...............................................................9 Connection to Copenhagen Bluetooth.............................................................
BUTTONS AND INDICATORS ON COPENHAGEN Status indicator Volume up Volume down Connect Power socket Aux optical and analog input Power Reset 6 USB Battery indicator
STATUS INDICATOR No light – Copenhagen is in standby mode Breathing – Copenhagen is hibernating (Copenhagen will automatically go to hibernation after 5 min. without signal) To wake up Copenhagen press the POWER button. • From standby for 2 seconds • From hibernation just play music on one of the inputs, press the power or one of the vol.
INPUT OPTIONS 8 • Bluetooth Fast and easy and works for virtually every phone, tablet or MAC/PC - supports aptX for Hi-Fi sound. • Wi-Fi Works for phones, tablets, MAC/PC Wi-Fi and networked dlna enabled devices - supports Wi-Fi Direct. • Wired optical or analog For music players or media players without wireless connection. • Wired USB Works for iOS device at present – will charge your iOS device while playing music from it.
CONNECTING PRIORITY Copenhagen makes automatic selection of input for you based on the following rules. 1. 1st priority is Wi-Fi and USB If Wi-Fi or USB is connected and playing music, other connections are disconnected. 2. 2nd priority is Bluetooth If Bluetooth is connected and playing music, a wired analog or optical connection will be disconnected. 3. 3th priority is wired When no Bluetooth, USB or Wi-Fi is used, you can use the wired input.
CONNECTING WITH BLUETOOTH Fast and easy wireless connection for virtually every phone 1. Select Bluetooth paring on your device. 2. Select the Vifa device on your Bluetooth enabled device. 3. Let the music play. You can adjust to volume up and down on the front of Copenhagen and on the playback device.
CONNECTING DIRECT WITH WI-FI For Airplay and dlna direct playback 1. Press and hold the CONNECT button until the status indicator flashes WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2. Find Wi-Fi network settings on your device. 3. Select the network called VIFA_....... (No password required) 4. Play music on your device - when the status indicator turns WHITE the connection is established.
CONNECTING TO YOUR WI-FI NETWORK Manual Set-up VIFA_AIRPLAY 1. Press and hold the CONNECT button until the status indicator flash WHITE rapidly and then release the CONNECT button – the indicator will now start to pulse until it receives a music signal. 2. Find Wi-Fi network settings on your device 3. Select the network called VIFA_....... (No password required) 4. On your device open the browser (e.g. Safari or Internet Explorer) and enter 192.168.1.1 in the address line, and press enter.
http://192.168.1.1 VIFA AIRPLAY SETUP 5. Now the Copenhagen setup page open up. 6. Choose your network and enter the password if needed. Then type in the name you want displayed for Copenhagen on the network ex. “Copenhagen Living room”. 7. Then press “Apply”. 8. On your device, remember to change network back to your preferred network. 9. Play music on your device - when the status indicator turns WHITE the connection is established.
CONNECTING TO YOUR WI-FI NETWORK Using iOS device 1. Make sure your iOS device is connected to your network. 2. Connect your iOS device to Copenhagen using a USB cable. 3. Press and hold the CONNECT button on Copenhagen until the status indicator flashes YELLOW rapidly and then release the CONNECT button.
4. The iOS device will ask you if it may transfer network settings to the speaker. Press Allow on the iOS device. 5. When the status indicator on Copenhagen turns WHITE, the connection is established.
CONNECTING TO YOUR WI-FI NETWORK Using WPS WPS 1. Press WPS button on your router. 2. Press and hold the CONNECT button until the status indicator flashes YELLOW rapidly and then release the CONNECT button. 3. When the status indicator on Copenhagen turns WHITE, the connection is established.
PLAYBACK THROUGH WI-FI Connect your playback device and Copenhagen to the same Wi-Fi network - And playback is simple, choose Copenhagen as sound device or renderer on your playback device. For iOS device just press the Airplay logo and choose Copenhagen. Using iTunes on a MAC/PC, you can stream music through your network to multiple Vifa Copenhagen simultaneously. You can even remote control iTunes with a free Apple remote app.
WIRED CONNECTION Connect 18 Aux optical and analog input; MP3 players, media streamer or TV USB / iOS device • On the back of Copenhagen the 3,5 mm mini-jack auxiliary input, will support 2 channel analog signal or optical input with a digital data stream up to 24bit/192kHz. • To lock on to wired input press and hold the CONNECT button, until the status indicator flashes rapidly GREEN and then release.
BATTERY CHARGE Power socket Power Battery indicator A full charge will take 3-4 hours. Keep Copenhagen plugged in when near power outlet. The intelligent power management will keep the battery in perfect condition. When charging you can see the progress.
RESET AND SET TO FACTORY DEFAULT Connect Power Reset RESET - USED IF COPENHAGEN LOCKS UP To reset Copenhagen press the reset button shortly - no user settings will be lost. FACTORY DEFAULT - SET’S COPENHAGEN’S SOFTWARE BACK TO FACTORY SETTINGS To factory default Copenhagen – press and hold the POWER and the CONNECT button simultaneously until the status indicator starts triple flashing.
THE VIFA APP To get the most of your Vifa Copenhagen download the free Vifa app. You can find link’s to the app. under “support” on the Vifa WEB This will allow you to: / The Vifa app allows you to: • Adjust the sound to your preferred taste or surroundings • Change the name that Copenhagen will show on the Wi-Fi network. • Change the network settings on Copenhagen • Manage your inputs on Copenhagen • Adjust the light intensity of the ”status indicator” www.Vifa.
PRODUCT CARE This product is designed to premium music performance in normal living space. Exposure to rain, moisture, high humidity or sources of heat may damage the product. The intended use is within a temperature range of 5 - 40°C (40 - 105°F). CLEANING Your Vifa product is covered by beautiful highly durable textile from Kvadrat. Remove non-greasy stains by carefully dabbing with a lint-free cloth or use a lint roller to remove lint from the textile.
TROUBLESHOOTING If the status indicator lights RED constantly – please set Copenhagen to standby mode by pressing the POWER button for 4 seconds. After this, please unplug the power cord and wait for approximately 5 min. before plugging in Copenhagen to the power again. Here you can find further support on our Vifa products: www.vifa.
SPECIFICATIONS Description Portable wireless loudspeaker Technical features Bluetooth aptX. Wi-Fi direct. Apple AirPlay Works with dlna DSP signal processing Lithium Ion battery Force Balanced Woofers Digital pure path amplifiers Driver units Tweeter 24 2 X 28 mm Vifa driver unit with soft dome and neodymium magnet Midrange 2 X 50 mm Vifa driver unit with aluminium cone and neodymium magnet Woofer 2 X 80 mm Vifa driver unit with flat sandwich cone and neodymium magnet.
REGISTER We encourage you to register your product at: www.vifa.dk/register A Vifa product is in compliance with directives of relevance, including RoHS directive – see product label for more regional regulatory approvals. Vifa Copenhagen AirPlay works with iPod touch (4th, 3rd and 5th generation), iPhone (5S, 5C, 5, 4S, 4, 3GS), iPad (4th, 3rd, 2nd and 1st generation), iPad mini, with IOS 4.3.3 and iTunes 10.2.2 (Mac or PC) or later.
IMPORTANT STATEMENTS: This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la section 15 des réglementations de la FCC. Le fonctionnement de l’appareil est sujetaux deux conditions suivantes : 1.
User manuals for licence-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
