User Manual

Setup WiFi from the Direct Network
The MSU can create its own network to which devices can connect to allow direct streaming music
without use of a home network. This can be used to configure the MSU to connect to the home
network.
1. Select input “WiFi” on the MSU either by the Input button on the MSU or the Remote
Control
2. Press in the middle of the Menu/Select wheel on the MSU to enter the Menu and go to
System Setup (“SysSetup”). Choose the “WiFi” and then select “Direct”. The MSU will
generate its own network. The display will blink “Link” doing the process.
Note: This can also be completed on the remote control by pressing and holding
“RadioUpperKey” down in 3 seconds.
3. When “WiFi D” is displayed, the MSU has created a network named
“Montana_MSUxxxxxx” where “xxxxxx” is an unic id-number for the given MSU.
4. Connect to the “Montana_MSUxxxxxx” network from a device with WiFi, e.g. PC, Mac,
smartphones, tablets or computers.
5. Open an internet browser (e.g. Internet Explorer, Chrome, Safari) and in the URL adresse
enter: “192.168.1.1”. This will open the network configuration page on the MSU.
Menu SysSetup WiFi Direct