User Manual

password.
Setting up the MSU to the WiFi can be done in various ways:
 Login Share – Select ”Login Share” in the sound unit menu. Then take you portable device
(mobile phone) which already contain the WiFi network data you wish to share with the
sound unit.
o It is only possible to use the share function with an iOS device
o It is important you have selected the WiFi network under settings on you mobile
phone then insert the cable from your phone to the USB connector on the back side
of the sound unit.
A menu on your phone pops up asking if you like to share your network data. Press yes and
wait a few seconds. The network data from the phone is then stored in the sound unit and
is now connected on you WiFi Home network.
When “WiFi N” is displayed, complete the process by pressing return bottom to come back
to the mail menu and turn off the sound unit and on again.
 Connect – The MSU can be configured to a WiFi network with a device connected to the
MSU on its own network. See section “WiFi setup methods” in appendix 1 and name your
sound unit via computer or tablet.
 WPS (WiFi Protected Setup) – If you have a router with WPS then click on the WPS button
on the router and chose WPS on the MSU. This connecs the MSU to the home network
without use of passoword.
o Important using this function the password of the network cannot be saved.
When the MSU is connected to WiFi it can be switched back and forth between a Direct
network and the home WiFi. To choose different home WiFi choose ‘Connect’
System Reset
The MSU can be reset to default settings by choosing ‘System Reset’.