User's Manual

OVERVIEW

BOTTOM

1. Mini USB in

COMPUTER: Connect directly to free USB port on your Mac/PC.

Note: Choose “SONAB” as sound output in Sound settings in system setting of the computer.

If “Line in” is used, the CTX needs to be powered with a separate power supply (Sold separately)

2. Line in

Connect any other analogue source with 3,5mm cable. Any analogue source with either 3,5mm

or stereo RCA output can be connected. The CTX must be connected to a USB power supply

through the mini USB port (sold separately) when the line in is used.

TOP

3. LED wireless indicator

Blue for wireless connection, Red for no connection (and Standby).

4. Channel

Set to channel 1, 2 or 3. (Whole system must use same channel as CTX transmitter.)

5. ID code

On each Channel(1-2-3), there is 10 different ID codes. Set whole system with same ID code.