User's Manual

POWER

1. Connect the power cable to the bottom of your MiniPod Bluetooth and to your wall outlet.

2. Power ON your MiniPod Bluetooth either by pressing the /Mode button on the speaker,

or by using the -button on the remote control. As default, MiniPod Bluetooth will be in

Bluetooth mode when powered on.

You are now ready to nalize the setup depending on how you want to use your MiniPod

Bluetooth.

NOTE: If your MiniPod BT has not played back audio for 5 minutes, it will automatically go to

Network Standby mode, to minimizing power consumption. This is according to EU regulations.

Power consumption in Network Standby mode is below 1.1W.

NOTE: All Wireless communication can be disabled (or enabled again) by pressing and

holding the 2 buttons (BT Pairing and Stereo Pairing) simultaneously for 8 seconds. This is a

mandatory feature according to EU regulations.

Power on the MiniPod Bluetooth