User's Manual

5
Preset 1 / Skip backwards
Press and hold for two seconds to recall Internet Radio preset 1. The
LED flashes and a beep will be heard and Internet Radio preset 1 will
start to play. Alternatively when playing from Bluetooth or streaming
services tap to skip back one track. When playing from network
content tap to skip back to the start of the track. Tapping a second
time will skip back to the previous track. The LED will flash each time
an action is performed.
Preset 2 / Skip forwards
Press and hold for two seconds to recall Internet Radio preset 2.
When playing from Bluetooth or streaming services/network content
tap to skip forward one track.
Preset 3 / Play/Pause
Press and hold for two seconds to recall Internet Radio preset 3.
When playing from Bluetooth or streaming services/network content
tap to pause playback, and tap again to resume paused playback.
Preset 4 / ‘Like’
Press and hold for two seconds to recall Internet Radio preset 4. The
‘Like’ function is a future feature for streaming services that allows
feedback of user preferences song by song.
Bluetooth / Stop (Aux)
Press and hold for two seconds to turn on Bluetooth, the LED starts
to flash when Bluetooth is connectable/pairable and lights
continuously when a connection to a device is made.
Before a Bluetooth device can stream audio to a Musaic Player it must
be paired with it. When the light is flashing go into the Bluetooth
settings menu on your Bluetooth device and simply select Musaic
MP5 or Musaic MP10 from its list of pairable devices. After pairing the
device will be able to connect and send audio to the Musaic Player as
long as it is within about 10m/30 feet of it (the standard range for
Bluetooth). For already paired devices the Musaic Players always try
to automatically connect when you turn on Bluetooth, see page 18 for
full details. Pairing/connectable mode cancels itself after
approximately 60 seconds if no pairing/connection is performed.
When in Bluetooth mode or any other streaming mode tap the button
to stop playback. When all other playback types are stopped the
auxiliary input is always selected (if something has been plugged in).
Home Control/Lighting
Tap to activate Home Control mode. The LED will light up and the
other nine buttons will become Home Control buttons allowing
lighting scene/mood recall, on/off control and brightness raise/lower
with suitable compatible systems. Home Control mode cancels itself
after approximately ten seconds if no action is performed. See page
19 for more details.
Mute
Tap to mute the speaker output. Tap again to un-mute. The LED will
light when the output is muted.
Volume down
Tap to turn the volume down by one step. Press and hold to slowly
decrease the volume.
Volume up
Tap to turn the volume up by one step. Press and hold to slowly
increase the volume.
Standby/On
Tap to switch the unit between On and Networked Standby modes. In
Networked Standby the Player powers down all un-needed functions
but keeps its network connection active so that it can be quickly
woken up from the top panel or Apps. Alternatively press and hold to
switch the unit into full Standby mode. In full Standby the network
connections are also powered down and the unit can only be woken
up by the Standby/On button on the top panel. The Player takes 30-
60 seconds to fully power up again from this mode. Standby is
indicated by a red LED. Networked Standby is indicated by a purple
LED and On by a blue LED.
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10