User's Manual

11
Players: Tap this button to select one or more Players to play
music to. Always select a Player or Players first then select a
music source from the options below.
Internet Radio: Tap to browse and play from thousands of
‘radio’ stations broadcast over the internet.
Music Libraries: Tap to select music from a Network Hard-
drive/NAS drive on your home network or a PC/Mac running suitable
UPnP™/DLNA™ software.
Music on iPad/Tablet/Phone: Tap to select and play music that
is stored locally on the iPad/Tablet/Phone.
Streaming: Tap to select a streaming service. Tapping on a
services icon will open that services app if it is installed on your
device. The icons that appear here are set via the Setting menu.
Home Control: Tap to go to the Home Control menu and set
and control lighting scenes/mood or other home control functions
with compatible equipment. Note this menu can be disabled in the
Settings menu if it is not being used.
Alarms/Timers: Tap for settings related to wakeup alarms and
sleep timer.
Settings: Tap for various settings and options as described later
in this manual.
Back button: Appears when there is a menu item to go back to.
Main pane: This changes to shows selectable items for the
current music source or other menu.
Footer: The footer contains the ‘transport’ controls such as
Play/Pause and Track skip buttons shown.
Skip backwards: When playing from Bluetooth or streaming
services tap to skip back one track. When playing from network
content tap to skip back to the start of the track. Tapping again when
at the start of a track will skip back to the previous track.
Skip forwards: When playing from Bluetooth or streaming
services tap to skip forward one track.
Play/Pause: When playing from Bluetooth or streaming services
tap to pause playback. Tap again to resume paused playback. The LED
above the Pause button on the top of the unit will light and quickly
blink off every 4 seconds whilst the playback is paused.
Queue: Tap to open the queue. The queue is the list of
songs/tracks that will be played. Songs/tracks can be dragged into the
queue or added to it as shown in the later sections.
Random/Shuffle: Tap to randomise playback from the queue.
Repeat: Tap to repeat playback of the queue every-time it
finishes. Tap again to repeat just one track. Tap a 3rd time to cancel
repeat playback.
Mute: Tap to mute the speaker output. Tap again to un-mute.
The LED above the mute button on the top of the unit will light and
quickly blink off every 4 seconds whilst the output is muted.
Volume Control: Tap to drag the slider to turn the volume up or
down. If multiple Players have been selected a volume control for
each will appear when you tap the slider button.
Standby/On: Tap to switch the unit between On and Active
Standby modes. In Active Standby the Player powers down all un-
needed functions but keeps its Wi-Fi active so that it can be quickly
woken by the Standby/On button or by the Musaic Apps. The power
consumption in Active Standby is approximately 4 watts.
Press and hold to switch the unit into full Standby mode. In full
Standby everything is powered down including Wi-Fi and the unit can
only be woken up by the Standby/On button on the top panel. The
Player will also take 30-60 seconds to fully power up from this mode.
The power consumption in Standby is <0.5 watts.
Standby is indicated by a Red LED, Active Standby by a purple LED
and On by a blue LED above the Standby/On button on the top panel
of the unit.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
9
8
9
10
10
11
11
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9