User's Manual

= Orange LED
= Purple LED
= Blue LED
SOURCE VOL DN VOL UP ON/STBY
Stadium “Wireless” Button Operation and Wireless Setup
Network WiFi
Mode
Direct WiFi
Mode
Bluetooth
Mode
Notes:
Default (AC connected) is Wi-Fi Network mode. Hold “Wireless” button 3 seconds to enter Wi-Fi Direct mode. Hold “Wireless” button 3 seconds to return to Wi-Fi
Network mode. Press “Wireless” button (<3 sec.) to enter Bluetooth mode. Press “Wireless” button (<3 sec.) to return to last used Wi-Fi mode (Network or Direct).
When exiting sleep or standby mode, remember last used input. If another source is being used and a Wi-Fi/AirPlay stream begins, automatically switch to Wi-Fi input,
per Apple Spec.
LED flashes rapidly (4Hz) during BridgeCo initialization and during Bluetooth pairing.
LED flashes slowly (1Hz) when searching/waiting for Network Wi-Fi, Direct Wi-Fi, or Bluetooth connection.
LED is on (no flashing) when connection is made to Network Wi-Fi, Direct Wi-Fi, or a Bluetooth device is connected.
If no connection is made for 10 minutes, Wireless LED turns OFF.
LED is ORANGE for Wi-Fi Network mode. Bluetooth radio is OFF.
LED is PURPLE (ORANGE & BLUE) for Wi-Fi Direct mode. Bluetooth radio is OFF.
LED is BLUE for Bluetooth mode. Wi-Fi radio remains on, per Apple Spec.
AC connected
= Initialization
= Searching
= Connected
= Initialization
= Broadcasting
= Connected
= Pairing Mode
= Searching
= Connected
= Broadcasting
Hold WiFi
Setup Button
3 sec.
LED turns off. = Initialization
= Connected
= Connected
Hold BT
Pairing Button
3 sec.
= Initialization
= Searching
= Connected
First Time WiFi Setup
Using JB Connect
First Time WiFi Setup
Using Login Sharing
= Request WiFi
Network info from
iOS device.
The iOS device
prompts user to
allow sharing.
Hold WiFi
Setup Button
3 sec.
= Initialization
= Searching
= Connected
Normal Operation
= Initialization
= Searching
= Initialization
= Searching
AC connected AC connected
Input SSID
& Password
on Web Page
Click “Allow”
on
iOS Device
Connect
iOS Device
to USB Port
First Time
Bluetooth Pairing
= Initialization
= Searching
AC connected
Connect
With Web
Browser
System Restart
Factory Reset
(no flash drive
connected to USB)
= Reset
Hold Setup
and Pairing
Button 5 sec.
Off
= Initialization
= Searching
System Restart
“End User” Firmware
Update
(web page update)
= Updating
Update via
Web Page
Begins
Off
= Initialization
= Searching
Off
Critical Firmware
Problem
= Firmware
= Red LED – Use Power LED
Stadium Factory Reset and Firmware Operations
= Orange or Purple LED
= Connected
Begin
Wi-Fi
Stream
Press
Wireless
Button
= Searching
Last Used
WiFi Mode
“Factory“ Firmware
Update (flash drive
connected to USB)
Hold Setup
and Pairing
Button 5 sec.
Hold
Wireless
Button
3 sec.
= Update Mode
Press Setup
and Pairing
Button
= Confirm Update
Off = Updating
System Restart
= Initialization
= Searching
= Update Complete
= Update Complete
= Reset Complete
= Connected
Connection
Made
= Searching
Current
Wireless
Mode
Press
Wireless
Button
= Searching
10 min.
Wireless LED off
= No Connection
for 10 minutes.
Radio keeps
searching.
WIRELESS
10 min.