User's Manual

EXAMPLE CONNECTIONS

CONNECT DEVICE DIRECTLY BY CABLE TO WR200

There is a line output on both unit 1 and 2. With this feature you can connect a stereo/

receiver or powered speakers directly to the WR200 via a cable. The devices will then play

wireless audio at the same time as your wireless Living speakers.

Note: You can connect any device with line input.

If using more than one WR200 set, use different extender channels (X, Z and Y) for all sets.

Change the house code accordingly;

Set A: receive house code 1, send house code 2.

Set B: receive house code 2, send house code 3.

Set C: receive house code 3, send house code 1.

Stereo/Receiver Powered speakers

Unit 1 sending to two or more unit 2 modules.

(Unit 2 (WER202) modules of WR200 are

also sold separately.

4. EXTENDING NETWORK

IN DIFFERENT DIRECTIONS

5. EXTENDING NETWORK WITH UP TO THREE WR200 SETS