User's Manual
5. POWER on transmitter controller us-
ing remote control.
6. Transmitter will automatically sync
to furniture.
BASIC USE
Refer to page 5 for remote functions
Transmitter controller power LED
remains red when o, and will
alternate red and blue when remote
power button is pressed. Light will
remain blue when synchronized
with media chair. (b) Selecting
items connected to your transmitter
controller. (c)
Simply press and release the Input key
to change through the various inputs.
The appropriate light on the front of
your transmitter controller will light to
indicate the Input chosen.
Simply press and hold the VOLUME +
key or the VOLUME key to raise or
lower total system volume. (d)
To mute all speakers, press the MUTE
key. Pressing MUTE again or the
VOLUME + OR VOLUME key will
unmute your system. To adjust the
levels of dierent speakers, use the +
or – key for the channel that you wish
to adjust.
To utilize Clear Voice, adjust the
DIALOG + or – keys to increase or
decrease the volume of dialog. The
SURR keys raise or lower the volume
of the rear speakers near your head.
Use the BASS + or – keys to raise or
lower the amount of bass. The TACTILE
keys will raise or lower the level of the transducer. The level of transducer intensity is a matter of personal taste, and
media source.
Restore settings–If you are unsatised with your personal settings and wish to restore them all to factory settings and
start again, simply press and hold both the SURR + and – keys, and factory settings will immediately reset. You may now
begin adjusting levels again to obtain the levels that you prefer.
6