User's Manual

FREQUENTLY ASKED QUESTIONS
What cables do I need to connect media sources to wireless transmitter?
Below is a list of cables needed, which are usually included in media devices. The HiQ Media Chair by Klaussner® does not
include these cables.
Will the HiQ Media Chair by Klaussner® interfere with my other home wireless products?
The advanced 2.4GHz wireless technology found in both the media chair and transmitter controller examines the entire
2.4GHz band in the area to detect any other wireless technologies that are in use, such as wireless routers, and then
transmits around the spectrum used by those sources.
*If you experience wireless network issues after installing a media chair, you may need to adjust your router settings, such as range extension features.
Can I use a HiQ Media Chair by Klaussner with other wireless products?
The HiQ media chair by Klaussner® transmitter controller will only work with the HiQ chair. It will not work, or interfere,
with any other wireless products.
What is the maximum distance that HiQ media chair by Klaussner® products can transmit and receive wireless
signals?
These products were designed to have an average line of sight transmitting/receiving distance of 30 feet. While it is
possible to transmit through walls, ceilings and oors, every scenario will be dierent because every environment is
dierent.
Will my transmitter controller work inside a cabinet or entertainment center?
In most cases the transmitter controller’s wireless capability will pass through cabinets. However, the remote control
is infrared (IR), which requires that the remote ‘sees’ the transmitter controller to control it. The remote and transmitter
controller are compatible with virtually all IR extender or repeater systems if the transmitter controller must be located in
a place where it is out of sight from the remote.
Can I program my universal remote to work with the HiQ Media Chair by Klaussner®?
Universal remote manufacturers do not have the media chair IR codes in their databases; therefore a non-learning
universal remote will not work with this system. However, the IR control codes for the transmitter controller remote
should be able to be learned by almost any learning universal remote control.
If my neighbor and I both own HiQ Media Chair by Klaussner® products, will our systems interact?
The System code feature allows you to select a unique channel for your HiQ Media Chair by Klaussner® to keep your
system from interfering with a nearby system. The factory default System code is 1 for all HiQ Media Chair by Klaussner®
components and does not need to be changed unless another HiQ Media Chair is nearby and interfering.
Can I have more than one HiQ media chair by Klaussner® in one home?
Yes. Thanks to great system exibility, you can have more than one chair assigned to one transmitter controller. You
can also have two completely separate systems in one home with as many chairs as you would like assigned to each
transmitter controller.
8
Stereo RCA jacks Coax digital TOSLINK (0ptical) 3.5mm (1/8 inch) stereo
to RCA stereo jacks