User's Manual

How to get great stereo sound using two
FREYA speakers
How to get great stereo sound using two
FREYA speakers
PAIRING TWO FREYA’S PAIRING TWO FREYA’S
1. Power ON your 2 FREYA speakers and
make sure that no other devices (eg. PC,
iPhone, Android phone) are connected
to any of them. Pick one FREYA as your
number 1.
2. On the backside of your FREYA
speakers you will nd a button called
”Stereo Pairing”.
On FREYA number 1: press and hold
the ”Stereo Pairing” button for 4
seconds and this FREYA will be set as
left speaker. (Blue LED will start ashing)
3. On your FREYA number 2: press the
”Stereo Pairing” button once and this
FREYA will be set as your right speaker.
(Blue LED will start ashing).
Note: This stereo pairing process must
be initiated on speaker number 2 within
2 minutes. Otherwise speaker number 1
will return to mono mode.
How to setup two FREYA’s:
4. Now your two FREYA speakers will
quickly communicate and soon say
”Your Device is now connected” to tell
you that Stereo Pairing is OK. You will
now see a blue LED on both speakers
that indicate 2 FREYA’s are connected in
stereo.
Note: If you want to use your FREYA
speakers as standalone speakers (mono
speakers) then you must un-set the
stereo pairing. Simply press once on
one of the ”Stereo Pairing” buttons on
either of your FREYA’s.
Note 2: If you permanently want to
remove the stereo pairing. Then you
must press and hold PREV and NEXT
simultaniously for 4 seconds to clear all
pairing data from memory. FREYA will
go to standby after this process.
Continued:
1211
Back side of FREYA.
Hold for 4 secs.