User Manual

English - 1110 - English
No image is displayed with Green blinking.
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plug on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the
maximum frequency of the monitor. Readjust resolution and frequency in
accordance with the monitor capacity. (Refer to Standard Signal Table)
Power Management Feature
The monitor is equipped with a power saving circuit that
confirms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESA).
The power management feature requires that the video card of the
computer should support DPMS function.
Status LED Sign Power Consumption
Normal mode Green ON Normal Power
DPMS mode Green Blinking
1W or Below(Analog)/
3.5W or Below(DVI)
1W or Below(Analog)/
3.5W or Below(DVI)
DPMS with Audio (Option)
Mute ON
Mute OFF 10W or Below
Adjusting OSD
Digital Input
Analog Input
1. Use to move Digital input ICON.
2. Press SELECT button to select DVI display.
SELECT
Input Source
MENU
1. Press the MENU button to access main menu.
2. Use to move Input source ICON.
3. Press SELECT button into the submenu.
SELECT
SELECT
1. Use
to move Analog input ICON.
2. Press SELECT button to select Analog display.