User's Manual

Check the resolution and frequency of
computer and video card, and set up a
gain in reference to the current monitor
mode and standard signal mode table.
Double images or
'ghosts'.
3332
Warning
To prevent damage or loss, please read this warning carefully.
When connecting/disconnecting the plug, pull out
the plug itself, and never pull the plug to prevent fire
caused by short.
To prevent electric shock, do not
connect/disconnect the plug with wet hand.
To prevent fire, do not connect a large number of
equipment in a single line.
To prevent fire and electric shock, pull out the plug
in case of thunder and lightening.
To prevent fire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
AUTO / EXIT
VOL
AUTO / EXIT
VOL
AUTO / EXIT
VOL
If you see smoke or smell something burning, stop
using the unit, switch off the power, pull out the plug,
and then contact your local service station.
Perform OSD ADJUSTMENT.
Perform AUTO ADJUSTMENT.
Adjust COLOR at User Mode in OSD Color
Menu.
Picture is dark.
Picture is biased or cut
or too wide.
Check the voice signal connection code or
adjust volume.
No sound.
Adjust BASS and TREBLE.
Dead sound.
Check if the selected channel mode is in
accordance with the channel mode of the
area.
Select AUTO SEARCH to set up the
channel automatically.
TV signal is not
received.
Monitor is in power saving mode.
Power LED turns into
amber or blinking
amber.