User's Manual

2928
1.ANALOG Standard Signal Table
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds
the maximum frequency of the monitor. Readjust resolution and fre-
quency in accordance with the monitor capacity. (Refer to Standard
Signal Table)
VGA (720 400)
VGA (640 480)
VGA (640 480)
SVGA (800
600)
XGA (1024 768)
XGA (1024
768)
SXGA (1280 1024)
SXGA (1280
1024)
MAC (640
480)
MAC (832
624)
MAC (1152
870)
31.469
31.469
37.500
46.875
48.363
60.023
63.981
79.976
35.000
49.726
68.681
70.087
59.940
75.000
75.000
60.004
75.029
60.020
75.025
66.667
74.551
75.062
28.322
25.175
31.500
49.500
65.000
78.750
108.000
135.000
30.240
57.284
100.000
Installing Option Stand
The monitor is available for various VESA standard stands.
Follow the following instruction for VESA stand.
1. Place the monitor with its LCD
panel on the flat ground covered
with cushion or soft cloth.
2. Unscrew six screws.
3. Disassemble the stand.
4. Locate the option stand on the
supporter.
5. Tighten four screws.
6. Stand the monitor and spread out
the stand bar.
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)