User's Manual

98
Functions
Name and Function of Front Keys
Front panel
MUTE KEY
SOURCE KEY
AUTO/SELECT KEY
MENU
KEY
VOL KEY
VOL KEY
CH KEY
CH KEY
POWER KEY
Power Switch
Power switch is located in the lower center of the monitor stand.
You can push the switch to turn on/off the power.
Power Saving LED
Dark : Power off
Green : Normal mode
Green blinking : Power Saving mode or check signal Cable mode.
Signal Source LED
Each of the five LEDs (from left; PC1, PC2, TV, V1 and V2) over the power
switch indicates the source of the signal which the monitor displays.
On Screen Display (OSD) Function Button
OSD buttons on the front of the monitor perform the following functions.
MUTE : Cut off sound
SOURCE : monitor displays source of the signal in order.
(PC
VIDEO VIDEO V)
AUTO/SELECT : Press this button, when OSD is not displayed, to perform
automatic setting. If you press this button when OSD is
displayed, you can select icons.
MENU : Press this button to display menus. if you press this button when OSD is
displayed, You can switch display to the previous menu and exit menu.
POWER : Power switch.
CH : Press this button to select TV channel in TV mode when OSD is not
displayed. Or press the button, when OSD is displayed, to move the
cursor into the menus which you want. when OSD is not displayed, you
can adjust brightness or contrast in PC/VIDEO mode.
VOL : Press this button to adjust volume of audio when OSD is not displayed.
By pressing this button when OSD is displayed, you can move cursor
into the menus or change gate level.