Installation Instructions / Warranty E 04059XX0 S 04057XX0
Wall-mounted Pot Filler S Wall-mounted Pot Filler E 04057XX0 04059XX0 2 04057XX0 04059XX0
Technical Information Recommended water pressure Hole size in mounting surface Max. wall thickness Flow rate This faucet is intended for cold water only. 14.7 - 72.5 psi 1 3/16" 1 1/2" 2.2 gpm Installation Considerations • For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber. • Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation.
Push the escutcheon over the mounting flange. Thread the faucet onto the mounting nipple. Push the escutcheon out of the way. Tighten the set screw. Push the escutcheon against the wall.
Remove the aerator (1). Turn on the water and flush the faucet (2). Check for leaks. Turn the water off and install the aerator (3). 2. 1. 3. Caution The pot filler may get hot when the arm is positioned above the stove's burner. Swing the pot filler away from the stove after use.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
LENGTH OF WARRANTY Replacement or repaired parts of products will be covered for the term of this warranty as stated in the following two sentences. If you are a consumer who purchased the product for use primarily for personal, family, or household purposes, this warranty extends for as long as you own the product and the home in which the product is originally installed.
www.hansgrohe-usa.com US - Installation Instructions • Revised 03/2008 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel.
