Installation Guide

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
Intended use of the handle 41530XXX: The handle
is not a medical product, it is not intended for
physically impaired persons, but only for general
private use.
Use only the handle for support, the remaining
products are not intended to be used as supports.
Check the proper attachment and tight seating of the
installed products periodically (annually).
English
Cleaning (see page 20) and
enclosed brochure
Lift off pump and lid for filling and cleaning.
Dismounting (see page 20)
Dimensions (see page 17)
The glass could be of a different size as
illustrated due to it being blown by mouth.
Do not use silicone containing acetic acid!
Installation Instructions
Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels
are only suitable for concrete. For another wall
constructions the manufacturer’s indications of the
dowel manufacturer have to be taken into account.
The glass contains lead oxide.
Spare parts (see page 20)
XXX = Colors
000 = chrome plated
820 = brushed nickel
Symbol description
Assembly see page
18
Indicazioni sulla sicurezza
Durante il montaggio, per pevitare ferite da
schiacciamento e da taglio bisogna indossare guanti
protettivi.
Impiego conforme all’uso dell’impugnatura
41530XXX: L’impugnatura non è un prodotto
medico, non è adatto per persone disabili, bensì è
destinato solo nell’ambito privato.
Per tenersi deve essere utilizzato esclusivamente
l’impugnatura, gli altri prodotti non sono adatti per
questo scopo d’impiego.
Il fissaggio a regola d’arte e la sede fissa dei
prodotti montati va controllato a intervallo periodico
(annualmente).
Italiano
Pulitura (vedi pagg. 20) e brochure
allegata
Per riempire e pulire il contenitore togliere
la pompa e il coperchio.
Smontaggio (vedi pagg. 20)
Ingombri (vedi pagg. 17)
Pezzi soffiati – Non si accettano dei reclami
a causa di tolleranze dimensionali
Non utilizzare silicone contenente acido
acetico!
Istruzioni per il montaggio
Quando il personale tecnico specializzato esegue il
montaggio del prodotto è necessario assicurarsi che
la superficie di fissaggio sia piana in tutta l’area di
fissaggio (senza giunti sporgenti o spostamento delle
piastrelle), che la struttura della parete sia adatta per
il montaggio del prodotto e soprattutto che non ci
siano dei punti deboli. Le viti e i tasselli in dotazione
sono adatti solo per calcestruzzo. In caso di altre
strutture della parete vanno osservare le indicazioni
del produttore dei tasselli.
Il vetro contiene ossido di piombo.
Parti di ricambio (vedi pagg. 20)
XXX = Trattamento
000 = cromato
820 = brushed nickel
Descrizione simbolo
Montaggio vedi
pagg. 18
3