Installation & Assembly

2
Technical Information
Flow rate - 04487xx0, 04541xx0, 2.5 GPM
04542xx0
Flow rate - 04520xx0, 04543xx0 2.0 GPM
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Model #04487xx0, 04541xx0, 04542xx0:
This showerhead is for use with automatic
compensating valves rated at 2.5 GPM (9.5
L/min) or less.
• Model #04520xx0: This handshower is for
use with automatic compensating valves rated
at 1.9 GPM (7.2 L/min.) or less.
• Model #04543xx0: This handshower is for
use with automatic compensating valves rated
at 1.7 GPM (6.4 L/min.) or less.
• Protection against backflow is provided by a
check valve in the shower arm mount.
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
7¼"
5⅞"
½"
G½
G½
3"
72
°
4¾"
7⅛"
G ½
04520xx0, 04541xx0
04487xx0
English
G
½
6¼"
72
°
4⅞"
04543xx0, 04542xx0
06505xx3