Installation & Assembly

2
English
3¼"
9⅝"
26°
26°
G ½
11¾" / 6¼"
26
°
26
°
G½
26469xx1
27387xx1
04534xxx
Model #27387xx1, #26469xx1
Model #04534xxx
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 140°F*
Flow rate
26469xx1, 27387xx1 max. 2.5 GPM
04534xxx max. 2.0 GPM
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum output
temperature can be no higher than 112° F.
• Model 26469xx1, 27387xx1: This showerhead is
for use with automatic compensating valves rated at
1.75 GPM (6.6 L/min) or less.
• Model 04534xxx: This showerhead is for use with
automatic compensating valves rated at 1.6 GPM
(6.2 L/min) or less.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
This unit meets or exceeds the following:
• ASME A112.18.1
• CSA B125.1
• Listed by IAPMO for use in the US
and Canada
This unit meets or exceeds the following:
• ASME A112.18.1
• CSA B125.1
• WaterSense certified
• Listed by CSA for use in the US
and Canada