Installation & Assembly

2
Technical Information
Max.owrate 2.0GPM
English
*Pleaseknowandfollowallapplicablelocalplumbing
codeswhensettingthetemperatureonthewaterheater.
Installation Considerations
Forbestresults,Hansgroherecommendsthat
thisunitbeinstalledbyalicensed,profes
-
sionalplumber.
Pleasereadovertheseinstructionsthoroughly
beforebeginninginstallation.Makesurethat
youhavealltoolsandsuppliesneededto
completetheinstallation.
Topreventscaldinjury,themaximumoutput
temperatureoftheshowervalvemustbe
nohigherthan120°F.InMassachusetts,
themaximumoutputtemperaturecanbeno
higherthan112°F.
Thishandshowermustbeusedincombina
-
tionwithanapprovedbackowprevention
device.
Keepthisbookletandthereceipt(orother
proofofdateandplaceofpurchase)for
thisproductinasafeplace.Thereceiptis
requiredshoulditbenecessarytorequest
warrantyparts.
•
•
•
•
•
Croma E 100 VarioJet
04332XX0
Croma C 100 3-Jet
04334XX0
Croma E 75 3-Jet
04336XX0