User's Manual

19
Using the Transmitter
1 On/Off switch
2 Sound level
3 Socket for power plug/
charging cable
4 2.5 mm stereo socket
5 LED
5
1
2
4
3
Before First Use
• Charge transmitter before first use.
Charging the Transmitter
• Connect the transmitter with the power plug to a power supply.
While charging the LED shines red.
Charging time is about 5 hours depending on the status of the recharge-
able battery.
The transmitter can also be connected permanently to a power supply
with a mains plug.
Turning the Transmitter On/Off
• Use the On/Off switch to turn the transmitter on. The LED flashes blue
while searching for a connection to the miniMedia, then the LED shines
blue.
• Use the On/Off switch to turn the transmitter off.
• Turn the transmitter off when it is not in use.
Sound Level
• Press the sound level button to change the volume of the audio signal.
The LED flashes blue. The number of times the LED flashes (up to 5),
indicates the volume level.