User's Manual

• If tip is lodged in your ear canal, please see a Physician immediately to

ensure it is safely removed.

• The AQ charging station is for charging your hearing systems. (The AQ

hearing systems are already charged when delivered.)

• Place the AQ charging station on a ﬂ at surface (none metallic) where it is

easy to see.

• Do not position the AQ charging station in the immediate vicinity of

magnetic data media, televisions, monitors, cardiac pacemakers or other

electrical medical devices.

• Please ensure that the AQ charging station is not in the transmission path

of infrared remote controls.

• Plug the mains cable into the socket on the rear of the charging station.

• The integrated clock which is visible indicates operational readiness.

• In stand-by mode, the AQ charging station uses so little power that you

only need to take the mains plug out of the socket if you are going to be

away for a prolonged period.

AQ Charging Station

Setting up and Using for the First Time

Setting the Clock

• The charging station is supplied with the time preset.

• In order to switch between a 12-hour display (AM/PM) and a 24-hour dis-

play, press the two buttons located on the underside of the AQ charging

station for at least 5 seconds.

• The time can be set underneath the AQ charging station.

Please press any key for 3 sec. (colon of the clock display ﬂashes per-

manently), adjust clock time, display automatically

changes back into normal clock mode (colon of clock

display blinks).

• You cannot make any changes to the time during the

charging process.