Installation Guide

Secure blocker part with 4x screw(A).
Secure chimney part and , using 2x screw(B)
and 4x screw(C) as shown.
secure 2x part using 2x screw(C). Then put on
roof cap part , secure with 4x screw(C).
Connect the part finished in step 6 to house. Using
2x lock (E) to fix them on front and back, each using
4x screw(D).
(1)Secure part ⑨ using 4x screw(A) as shown.
(2)Secure a lock(E)with 4x screw(D), to make half of
top lid openable.
Attach 2x roof part ⑥ to the one finished in step3, put
on roof cap part
⑩
, fix using total 8x screw(B) here.