ELECTRIC HEATER Model Number: 9711054 ASSEMBLE & OPERATION INSTRUCTIONS Please read carefully and save these instructions.
Warning THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. The supplier will not be liable for any damages caused by failure to follow these instructions. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY - The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can be dangerous.
16. ALWAYS allow heating element to cool at least 10 minutes before touching any part of the heater. 17. Do not use near or in the immediate vicinity of a bath or swimming pool or any source of water. Never immerse unit, cord or plug in water or any other liquid. 18. This heater is not intended for use in bathrooms, laundry rooms and similar indoor locations; never locate the heater where it may fall into a bathtub, sink or other water container. 19. Do not leave the appliance unattended when in use.
Introduction These halogen lamp heaters produce instant and comfortable heat like the sun. These heaters are designed for domestic heating applications. Model 9711054 Voltage Wattage 120 V 1500W Dimensions W×H×D Weight 20×20×10 inches 7.
INSTALLATION Tools required (not provided): • • • • • Pencil Hammer Level Screw Driver Power Drill and drill bits A wall/ceiling mounting bracket is provided with the heater which has been specifically designed to allow this product to be fitted to a wall or ceiling. Before drilling the holders, confirm that the wall is solid and that there are no hidden water pipes or electric wires. CAUTION! The appliance must be installed on a solid surface.
Installation • • Do not face heater towards ceiling or wall. Heater should have 24 in clearance from each side and 8 ft from floor. REMOTE CONTROL: 1. POWER BUTTON: Turn the heater on/off.
TROUBLESHOOTING: The heater contains no user-serviceable parts. Troubleshooting is limited to checking the power source: 1. Check if the unit is turned on. 2. Check if the power cord is plugged into a properly-grounded electrical outlet. 3. Check if the electrical outlet’s circuit breaker/fuse is on and working MAINTENANCE: Periodic inspection and removal of dirt and contaminants will ensure that the heater can be operated safely.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect the life of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened with mentholated spirit or alcohol. 5. The heater contains no user-serviceable parts. If the product is damaged or otherwise malfunctioning, it must be returned to the manufacturer or its service agent or it must be properly disposed of.
