Use and Care Manual

INSTALLATION
Tools required (not provided):
• Pencil
• Hammer
• Level
• Screw Driver
• Power Drill and drill bits
A wall/ceiling mounting bracket is provided with the heater which has been specifically designed to allow this product
to be fitted to a wall or ceiling. Before drilling the holders, confirm that the wall is solid and that there are no hidden
water pipes or electric wires.
CAUTION! The appliance must be installed on a solid surface. Do not install on flammable wall coverings or on
surfaces that can be discolored or damaged when subject to heat.
Important: Ensure that the supply cable does not come into contact with reflector or hot surfaces. The supply cable
can be fixed to the metal mounting bracket behind heater with plastic zip ties.