HALOGEN INFRARED HEATERS Model Number: 9711001 (Black) ASSEMBLY & OPERATING INSTRUCTIONS Please read carefully and save these instructions
Warning THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. The supplier will not be liable for any damages caused by failure to follow these instructions. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY - The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can be dangerous.
16. ALWAYS allow heating element to cool at least 10 minutes before touching any part of the heater. 17. Do not use near or in the immediate vicinity of a bath or swimming pool or any source of water. Never immerse unit, cord or plug in water or any other liquid. 18. This heater is not intended for use in bathrooms, laundry rooms and similar indoor locations; never locate the heater where it may fall into a bathtub, sink or other water container. 19. Do not leave the appliance unattended when in use.
INSTALLATION Tools required (not provided): Pencil Hammer Level Screw Driver Power Drill and drill bits A wall/ceiling mounting bracket is provided with the heater which has been specifically designed to allow this product to be fitted to a wall or ceiling. Before drilling the holders, confirm that the wall is solid and that there are no hidden water pipes or electric wires. CAUTION! The appliance must be installed on a solid surface.
Wall Installation: Maximum Angle Minimum Angle Ceiling Installation: 5
Wall / Ceiling Installation: To install the plastic anchors into the wall, use a drill to place a hole in the wall. Using the hammer, tap the plastic anchor into the wall until it is flush. Cord Positioning: The cord side of the heater should face downward when installed vertically or on an incline. Correct Installation Incorrect Installation TROUBLESHOOTING: The heater contains no user-serviceable parts. Troubleshooting is limited to checking the power source: 1. Check if the unit is turned on. 2.
3. Clean the outer shell with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquids enter the heater. 4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 5. Use an air blower to remove any loose dust, dirt or debris from the unit. 6. DO NOT immerse the heater in water 7.
