Page 2 of 6
Page 3 of 6
Page 4 of 6
Page 1 of 6
Page 5 of 6
Page 6 of 6
Dining Table Owner's Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE CALL OUR CUSTOMER SERVICE HOT-LINE AT 1-866-851-8438 Between 9 A.M. - 5 P.M.
PARTS LIST PART# DESCRIPTION A Table top 1 B Table leg 4 C Support Tube 8 AA Bolt M6 x18mm 16 BB Bolt M6 x 35mm 16 CC Washer 32 DD Bolt Cover 32 EE Wrench 1 Page 5 of 7 PICTURE QTY
Assembly Steps: Note: Do not fully tighten bolts until assembly is completed and alignment is correct. Step 1. Carefully place the table top (A) upside down on a non-abrasive surface. Step 2. Assemble the table legs (B) to the table top (A) with bolts (AA) and washer (CC) as shown in figure 1. Figure 1 Step 3. Loosely attach the support tube (C) to the table leg (B) and table top (A) with bolts (BB) and washer (CC) as shown in figure 2. Step 4. Check the alignment and adjust if necessary.
Step 5. Verify all bolts are securely tightened before use and turn your table right side up. Your table is now ready to use. (Figure 3).
