Instructions / Assembly

Page

ASSEMBLY STEPS:

Note: Do not fully tighten bolts until assembly is completed and

alignment is correct.

STEP 1:

Place the seat frame (B) on a soft, flat non-abrasive surface. Attach the right arms (C) and left

arms (D) to the seat frame (B) using washer (CC) and M6*35 hex bolts (AA). Do not fully tighten

the hex bolts (AA) in this step.

STEP 2:

Attach the back frame (A) to the seat frame (B) using

washer (CC) and M6*35 hex bolts (AA). Attach the back

frame (A) to the arms (C) and (D) using washer (CC)

and M6*50 hex bolts (BB). Make sure all the bolts

are aligned correctly, and then fully tighten all the

bolts (AA) and (BB) with wrench.

Attach the bolt caps (DD).