Instructions / Assembly

Page 6 of 7
ASSEMBLY STEPS:
Note: Do not fully tighten bolts until assembly is completed and
alignment is correct.
STEP 1:
Place the seat frame (B) on a soft, flat non-abrasive surface. Attach the right arms (C) and left
arms (D) to the seat frame (B) using washer (CC) and M6*35 hex bolts (AA). Do not fully tighten
the hex bolts (AA) in this step.
D
C
CC
AA
DD
B
STEP 2:
Attach the back frame (A) to the seat frame (B) using washer (CC) and M6*35 hex bolts (AA).
Attach the back frame (A) to the arms (C) and (D) using
washer (CC) and M6*50 hex bolts (BB). Make sure all
the bolts are aligned correctly, and then
fully tighten all the bolts (AA) and (BB) with
wrench. Attach the bolt caps (DD).
DD
BB
A
D
C
CC
B
AA
DD
CC