Instructions / Assembly

ASSEMBLY STEPS:
Note: Do not fully tighten bolts until assembly is completed and
alignment is correct.
CC
STEP 1:
AA
BB
Place the table top frame (B) on a soft, flat non-abrasive
surface. Attach the table legs (C) to the top frame (B)
using washer (BB) and hex bolts (AA). Fully tighten all
the hex bolts with wrench (DD).
B
Attach the hex bolt caps (CC).
C
C
B
STEP 2:
Turn the table over and set it down
on its legs. And put the glass (A) onto
the top frame.
The table is now ready for use.
Page 6 of 6
A