Manual for 4 Pc Set with Firepit

Assembly
STEP 7
Checking for Leaks
WARNING: Before using this outdoor fireplace, make sure you have read, understand and are
following all information provided in the “Important Safeguards” section.
Failure to follow those instructions can cause death, serious injury or property damage.
Failure to inspect this connection or follow these instructions could cause death, serious bodily
injury or damage to property.
Checking Burner Connections
1. Make sure the regulator hose and valve connections are securely fastened to the burner and
the tank.
2. Visually check the connection between the burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the orifice.
4. Please refer to diagram (figure 1 and 2) for proper installation.
5. If the burner/venturi tube does not rest flush to the orifice, as shown (figure 1 and 2), please
contact 1-866-988-3300 for assistance.
FHTS80048C
17